State Water Heater 80 Gallon, Surface Mount Thermostat Commercial Electric Water Heater - 61,418 BTU - CSB8218SFE18KW208V3PH

Keep Hot‑Water Service Flowing With The State Sandblaster® 80‑Gallon Commercial Electric Water Heater (CSB8218SFE18KW208V3PH)

Supplying restrooms, kitchens, or locker rooms with steady hot water? The State Sandblaster® CSB‑82‑18‑SFE delivers dependable 18 kW electric power (≈61,416 BTU/h) in a durable 80‑gallon tank built for high recovery and long, reliable draws. Three rugged Incoloy immersion elements, a glass‑lined steel tank, and dual anode rods help reduce downtime, while surface‑mount thermostats and a hinged control door keep service simple.

• Brand: State Water Heaters
• MPN: CSB8218SFE18KW208V3PH (Sandblaster® CSB‑SFE Series)
• Type: Commercial Electric Storage Water Heater; Surface‑Mount Thermostats
• Capacity (Nominal): 80 Gallons
• Input Power: 18 kW (≈61,416 BTU/h)
• Recovery @ 100°F Rise: ~75 GPH (factory table/standard calc)
• Elements: 3 × Incoloy, low/medium‑watt‑density immersion; internally fused
• Electrical: 208V, 3‑Phase (field‑convertible terminal block for single‑ or 3‑phase across model range)
• Thermostats: Surface‑mounted; adjustable 120–181°F with manual high‑limit cut‑off
• Tank Construction: Glass‑lined steel; 150 psi working pressure (ASME 160 psi option on select models)
• Anode Protection: Two anode rods
• Connections: 1‑1/4″ NPT inlet/outlet (bottom inlet / top outlet); brass drain valve
• Dimensions (H × Dia): ~60‑1/4″ × 25‑1/2″
• Access & Service: Hinged control door; simplified, color‑coded circuitry; factory terminal block
• Listings: UL Listed; NSF/ANSI 5; meets DOE & ASHRAE/IES 90.1 standby requirements
• Warranty: 3‑Year limited tank / 1‑Year parts (commercial; see terms)

High‑Recovery Performance For Peak Hours

At 18 kW, the CSB‑82‑18‑SFE delivers approximately 75 gallons per hour at a 100°F rise—so back‑to‑back draws during busy periods keep moving without long waits.

Durable, Low‑Maintenance Components

Three Incoloy immersion elements resist oxidation and scaling. A glass‑lined tank and two anode rods add robust corrosion protection for long service life.

Installer‑Friendly Controls & Wiring

A hinged control door, surface‑mount thermostats with manual high‑limit, internal power‑circuit fusing, and a top terminal block streamline setup and service.

Code‑Smart Safety & Compliance

This unit meets DOE and ASHRAE/IES 90.1 standby requirements and ships with a CSA/ASME‑rated T&P relief valve for code compliance.

Sized Right For Tight Mechanical Rooms

A compact ~25‑1/2″ diameter and ~60‑1/4″ height help the tank navigate standard doorways and fit back‑of‑house spaces more easily.