State SUF100 199NE 100 gal Modulating Ultra Force Gas Commercial Hot Water Heater

State SUF100‑199NE Ultra Force™ 100‑Gallon Modulating High‑Efficiency Commercial Natural Gas Water Heater

If you need lots of hot water with low operating costs, the State Ultra Force SUF100‑199NE hits the sweet spot. This 100‑gallon, modulating, condensing commercial gas water heater is built for fast recovery, flexible venting, and simple day‑to‑day operation—great for restaurants, salons, multi‑family buildings, and light‑commercial jobs.

• Brand: State Water Heaters
• MPN: SUF100‑199NE (Ultra Force™, Natural Gas)
• Capacity: 100 Gallons
• Input: 199,900 BTU/h
• Thermal Efficiency: Up to 95–96%
• Recovery (GPH): 392 @ 60°F rise, 235 @ 100°F rise, 168 @ 140°F rise
• Fuel: Natural Gas
• Ignition: Direct Spark; Modulating Pre‑Mix Burner
• Heat Exchanger: Submerged Combustion Chamber with Helical/Spiral Coil
• Tank Protection: Permaglas® Glass Lining with Powered Anode Rods
• Controls: Intelligent Touchscreen Control, On‑Board Diagnostics, iCOMM®‑Ready Connectivity
• Venting: Power Vent or Direct Vent (sidewall or vertical)
• Vent Size / Materials: 3" or 4" — PVC, CPVC, Polypropylene, or AL29‑4C Stainless
• Water Connections: 1‑1/2" NPT (inlet/outlet)
• Gas Connection: 3/4" NPT (typical)
• Electrical: 120V, 60 Hz
• Max Working Pressure: 160 psi
• Temperature Range: 90–180°F (adjustable)
• Dimensions: Approx. 27‑3/4" Dia × 76–76‑1/2" H
• Compliance: Ultra‑Low NOx; AHRI, ANSI Z21.10.3 / CSA 4.3, ASHRAE/IESNA 90.1, SCAQMD 1146.2, NSF 5
• Warranty: 3‑Year Tank / 1‑Year Parts (commercial, limited)

High Output, Fast Recovery

At 199,900 BTU/h with a high‑surface‑area helical coil, Ultra Force delivers serious hot water—up to 392 GPH at a 60°F rise and 235 GPH at 100°F.

Modulating, Condensing Efficiency

The pre‑mix burner automatically adjusts to demand and condensing operation captures extra heat—reaching 95–96% thermal efficiency to help lower utility bills.

Smart Touchscreen Control

A simple, intuitive touchscreen speeds setup and service with clear status and fault codes. Built‑in connectivity (iCOMM®‑ready) makes monitoring and alerts easier.

Built To Last

The tank’s Permaglas® glass lining and powered anode rods help guard against corrosion, while the submerged combustion chamber and helical/spiral heat exchanger maximize transfer.

Flexible Venting, Easier Retrofits

Choose power‑vent or direct‑vent with 3" or 4" PVC, CPVC, polypropylene, or AL29‑4C stainless, sidewall or vertical. The compact 27‑3/4" diameter fits tight spaces.

Warranty