Power Myers QP10 1 HP Quick Prime Self-Priming Sprinkler Pump
Keep lawns green and wash-downs moving with the compact, high-output Myers QP10.
This 1 HP, self-priming centrifugal pump is built for long, continuous service on irrigation
zones, sprinklers, and cleaning stations. Myers’ Quick Prime diffuser helps the pump
re-establish prime after the initial fill, cutting downtime in seasonal or intermittent-draw
systems. A rugged cast-iron case and engineered-composite impeller handle daily duty,
while dual-voltage wiring (115/230 V) gives you install flexibility. Sized to fit common
pads yet strong enough to push multiple heads, it’s a reliable upgrade for yards, shops,
and sites that need steady flow.
- Brand: Myers
- Series: Quick Prime
- MPN: QP10
- Type: Self-Priming Centrifugal Sprinkler/Irrigation Pump
- Material/Finish:
High-tensile cast-iron case & motor bracket; thermoset diffuser; engineered-composite
impeller; carbon/ceramic shaft seal
- Dimensions: 9.5 inch (W) x 16.75 inch (L) x 9.875 inch (H)
- Phase: 1
- Capacity: 51.2
- Max Flow: 65 GPM
- Max Head: 108 feet
- Max PSI: 46 PSI
- Horsepower: 1 hp
- Voltage: 115/230 Volts
- Frequency: 60 Hz
- Suction Size: 1.5 inch NPT
- Discharge Size: 1.5 inch NPT
- Inlet: 1.5 inch FNPT
- Warranty: 1-year limited (see Pentair/Myers terms)
Everyday Performance You Can Rely On
Per the factory curve, QP10 delivers about 51.2 GPM at 20 PSI with a 10-ft suction lift
and reaches a 108-ft shut-off head (~47 PSI). That headroom helps keep sprinkler patterns
consistent as zones cycle and conditions change.
Quick Prime = Less Downtime
A proven diffuser and internal geometry allow the pump to re-prime automatically after
the initial fill—ideal for seasonal systems or applications where air can enter on the
suction side.
Durable Build, Easier Care
The high-tensile cast-iron case and engineered-composite impeller are designed for long
service life, with a carbon/ceramic mechanical seal to help resist wear. Follow the
maintenance steps in the IOM for best results.
Installer-Friendly Connections
Standard 1-1/2" NPT suction and discharge ports simplify piping. Keep total suction lift
within 25 ft, use proper screening, and verify voltage within ±10% of rating for smooth
startups.
Sized Right For Pump Pads
With a 16.75" length (A-dimension) and a low profile about 9.5" × 9.875", the QP10 fits
most existing pads and sheds—great for swaps where space is tight.
Installation and Operation Manual
Product Sheet
