State Water Heater 80 Gallon, Commercial Vertical Round Jacketed Storage Tank - PVG-0080-0OVT

Outfit State PVG-0080-0OVT 80-Gallon Vertical Jacketed Storage Tank

Add reliable hot-water buffer capacity without giving up floor space. The State PVG-0080-0OVT is a factory-jacketed, glass-lined 80 gallon storage tank designed for potable water systems served by water heaters or boilers. Thick foam insulation meets DOE/ASHRAE R-12.5 requirements to help curb standby loss, while a rugged steel jacket stands up to commercial use. Threaded tappings simplify tie-ins for recirculation, tankstat/thermometer, relief and drain. At just 25.25″ diameter, the tank fits through standard 30″ doorways for faster retrofits.

• Brand: State Water Heaters
• MPN: PVG-0080-0OVT
• Type: Commercial potable hot-water storage tank, vertical, factory jacketed & insulated
• Size/Capacity: 80 gal nominal
• Material/Finish: Glass-lined steel tank with heavy-gauge, baked-enamel steel jacket; foam insulation
• Performance: Standard working pressure 160 psi; glass-lined for storage temps up to 180 °F; insulation meets R-12.5 DOE/ASHRAE 90.1
• Connections/Fit: Threaded openings provided for 2″ NPT recirculation (front & rear) plus thermometer, relief valve, tankstat, and drain (see spec for locations)
• Dimensions: Approx. 63″ H × 25.25″ Dia; fits through standard 30″ doorways
• Included: Factory-jacketed glass-lined tank with foam insulation and anode rod; documentation
• Certifications/Compliance: Insulation complies with DOE & ASHRAE/IESNA 90.1 R-12.5; non-ASME model (ASME version available separately)
• Warranty: 5-year limited tank warranty

Save Heat, Lower Standby Loss

The PVG series is factory insulated to meet R-12.5—the DOE/ASHRAE baseline for commercial storage tanks—helping retain heat between draws and reduce operating costs. The heavy-gauge steel jacket with baked-enamel finish protects the insulation in mechanical spaces.

Buffer Capacity For Peak Demand

Add 80 gallons of ready-to-use hot water to stabilize supply during spikes from dishwashers, showers, or process sinks. Glass lining rated to 180 °F supports a wide range of DHW setups.

Durable Materials, Easier Care

State’s alkaline borosilicate glass lining resists corrosion, and an integral anode rod adds cathodic protection for longer service life. Threaded tappings and front access to fittings streamline routine maintenance.

Installer-Friendly Tappings & Layout

Factory 2″ NPT recirculation tappings (front & rear) plus threaded openings for a thermometer, relief valve, tankstat, and drain make piping straightforward. Follow the spec diagram for exact locations and clearances.

Sized Right For Tight Access

With a 25.25″ diameter and 63″ height, the tank fits through 30″ doorways—ideal for retrofits in older buildings and narrow corridors.

Built For Code & Pressure

This non-ASME model is rated to a 160 psi standard working pressure. If your jurisdiction or spec calls for ASME construction, choose the PVG-0080-00VTA125 variant with ASME stamp.