State Water Heater Sandblaster 119 Gallon, Surface Mount Thermostat Commercial Electric Water Heater - 61,418 BTU - CSB12018SFE18KW208V3PH

Keep Hot?Water Demands On Track With The State Sandblaster 119?Gallon Commercial Electric Water Heater (CSB12018SFE18KW208V3PH)

Power busy breakrooms, restrooms, and back?to?back service with the State Sandblaster CSB 120 18 SFE—a 119?gallon, surface?mount thermostat commercial electric water heater built for high recovery and long, dependable draws. With 18 kW of electric input (?61,416 BTU/h), three Incoloy immersion elements, and rugged glass?lined steel construction, it’s a proven choice for restaurants, salons, gyms, schools, and light commercial buildings.

• Brand: State Water Heaters
• MPN: CSB12018SFE18KW208V3PH (Sandblaster CSB?SFE Series)
• Type: Commercial Electric Storage Water Heater; Surface?Mount Thermostats
• Capacity (Nominal): 119 Gallons (?107?gal rated storage)
• Input Power: 18 kW (?61,416 BTU/h)
• Elements: 3 × Incoloy, low?/medium?watt?density immersion; individually fused
• Electrical: 208V, 3?Phase (field?configurable single? or 3?phase per model range)
• Thermostats: Surface?mounted; adjustable 120–181°F with manual high?limit cut?off
• Recovery @ 100°F Rise: ~75 GPH (factory table value)
• Standby Loss Compliance: Meets U.S. DOE & ASHRAE/IES 90.1 requirements
• Tank Construction: Glass?lined steel; 150 psi working pressure
• Anode Protection: Two anode rods for maximum corrosion resistance
• Connections: 1?1/4? NPT inlet/outlet (bottom inlet, top outlet); brass drain valve
• Controls & Service: Hinged front access panel; simplified, color?coded circuitry; single?panel control box
• Venting: Not required (electric)
• Dimensions (H × Dia): ~62?1/4? × 29?1/2? (top head ?35? diameter)
• Listings: UL Listed; NSF/ANSI 5; CSA?certified & ASME rated T&P relief valve
• Warranty: 3?Year limited tank / 1?Year parts (commercial; see terms)

High?Recovery Performance For Peak Hours

At 18 kW input, Sandblaster’s recovery at a 100°F rise is about 75 gallons per hour, so multi?fixture draws and back?to?back use keep moving during busy periods.

Durable, Low?Maintenance Components

Three Incoloy immersion elements resist oxidation and scaling, while two anode rods and a glass?lined tank add long?term corrosion protection.

Installer?Friendly Controls & Service Access

A hinged control door, surface?mount thermostats (with manual reset high?limit), and a factory terminal block streamline setup, diagnostics, and maintenance.

Code?Smart Safety & Efficiency

Built?in fusing protects elements, thermostats, and internal wiring. Foam insulation helps reduce standby loss, and the unit meets DOE and ASHRAE/IES 90.1 standby requirements.

Flexible For Commercial Layouts

Standard 1?1/4? NPT connections (bottom inlet/top outlet) simplify piping. Optional ASME 160 psi construction and manifold kits support battery installations.