Myers QP10 1hp Quick Prime Sprinkler Pump

Power Myers QP10 1 HP Quick Prime Self-Priming Sprinkler Pump

Keep lawns green and wash-downs moving with the compact, high-output Myers QP10. This 1 HP, self-priming centrifugal pump is built for long, continuous service on irrigation zones, sprinklers, and cleaning stations. Myers’ Quick Prime diffuser helps the pump re-establish prime after the initial fill, cutting downtime in seasonal or intermittent-draw systems. A rugged cast-iron case and engineered-composite impeller handle daily duty, while dual-voltage wiring (115/230 V) gives you install flexibility. Sized to fit common pads yet strong enough to push multiple heads, it’s a reliable upgrade for yards, shops, and sites that need steady flow.

• Brand: Myers
• Series: Quick Prime
• MPN: QP10
• Type: Self-Priming Centrifugal Sprinkler/Irrigation Pump
• Material/Finish: High-tensile cast-iron case & motor bracket; thermoset diffuser; engineered-composite impeller; carbon/ceramic shaft seal
• Dimensions: 9.5 inch (W) x 16.75 inch (L) x 9.875 inch (H)
• Phase: 1
• Capacity: 51.2
• Max Flow: 65 GPM
• Max Head: 108 feet
• Max PSI: 46 PSI
• Horsepower: 1 hp
• Voltage: 115/230 Volts
• Frequency: 60 Hz
• Suction Size: 1.5 inch NPT
• Discharge Size: 1.5 inch NPT
• Inlet: 1.5 inch FNPT
• Warranty: 1-year limited (see Pentair/Myers terms)

Everyday Performance You Can Rely On

Per the factory curve, QP10 delivers about 51.2 GPM at 20 PSI with a 10-ft suction lift and reaches a 108-ft shut-off head (~47 PSI). That headroom helps keep sprinkler patterns consistent as zones cycle and conditions change.

Quick Prime = Less Downtime

A proven diffuser and internal geometry allow the pump to re-prime automatically after the initial fill—ideal for seasonal systems or applications where air can enter on the suction side.

Durable Build, Easier Care

The high-tensile cast-iron case and engineered-composite impeller are designed for long service life, with a carbon/ceramic mechanical seal to help resist wear. Follow the maintenance steps in the IOM for best results.

Installer-Friendly Connections

Standard 1-1/2" NPT suction and discharge ports simplify piping. Keep total suction lift within 25 ft, use proper screening, and verify voltage within ±10% of rating for smooth startups.

Sized Right For Pump Pads

With a 16.75" length (A-dimension) and a low profile about 9.5" × 9.875", the QP10 fits most existing pads and sheds—great for swaps where space is tight.