{"product_id":"hansgrohe-88586000-tb-2-thermostatic-cartridge","title":"Hansgrohe 88586000 TB-2 Thermostatic Cartridge","description":"\u003ch2\u003eRefresh Hansgrohe 88586000 TB-2 ThermoBalance II Thermostatic Cartridge\u003c\/h2\u003e \u003cp\u003e Restore precise, consistent shower temperatures with the Hansgrohe 88586000 TB-2 thermostatic cartridge�engineered for ThermoBalance II valves. This genuine cartridge lets your valve regulate temperature accurately and includes an adjustable high-temperature limit stop to help meet code and reduce scald risk. It is the direct service part for ThermoBalance II systems and installs following Hansgrohe�s service steps. Use it to bring aging showers back to smooth, reliable performance without opening the wall. \u003c\/p\u003e \u003cul\u003e \u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Hansgrohe\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eMPN:\u003c\/strong\u003e 88586000 (TB-2)\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Thermostatic Cartridge for ThermoBalance II Tub\/Shower Valves\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eSize\/Capacity:\u003c\/strong\u003e For ThermoBalance II two-function valves (system flow rating up to 8 GPM @ ~44�45 psi)\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eMaterial\/Finish:\u003c\/strong\u003e Not specified (see service manual)\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003ePerformance:\u003c\/strong\u003e Thermostatic control with adjustable high-temperature limit stop per Hansgrohe service instructions\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eConnections\/Fit:\u003c\/strong\u003e Fits ThermoBalance II rough-in valves \u003cstrong\u003e06623000\u003c\/strong\u003e (without stops) and \u003cstrong\u003e06627000\u003c\/strong\u003e (with stops); for use with ThermoBalance II trims. Not for iBox or ThermoBalance I\/III valves.\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eDimensions:\u003c\/strong\u003e Cartridge inserts into existing rough body (layout-dependent; see manual)\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eIncluded:\u003c\/strong\u003e Thermostatic cartridge assembly (follow service booklet; remove old blue sealing gasket from rough before installing)\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eCertifications:\u003c\/strong\u003e When installed in a ThermoBalance II valve: ASME A112.18.1 \/ CSA B125.1; IAPMO listed; UL listed (see valve listing)\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e Hansgrohe Limited Lifetime consumer warranty; 1-year commercial (USA\/Canada)\u003c\/li\u003e \u003c\/ul\u003e \u003ch4\u003eRestore Stable, Safe Temperatures\u003c\/h4\u003e \u003cp\u003e The TB-2 cartridge maintains set temperature as pressures fluctuate, helping eliminate sudden hot\/cold swings. After installation you can set the integrated high-temperature limit stop to meet local code and reduce scald risk�Hansgrohe specifies a maximum shower outlet of 120 �F (112 �F in MA). \u003c\/p\u003e \u003ch4\u003eDesigned for ThermoBalance II Roughs\u003c\/h4\u003e \u003cp\u003e This is the factory cartridge for ThermoBalance II systems and services rough-in valves 06623000 (no stops) and 06627000 (with stops). It is not compatible with Hansgrohe iBox Universal Plus or other series; ThermoBalance I and III use different cartridges (TB-1 88585000 \/ TB-3 88500000). Verify your rough before ordering. \u003c\/p\u003e \u003ch4\u003eQuick, Guided Replacement\u003c\/h4\u003e \u003cp\u003e Hansgrohe�s service booklet shows the TB-2 change-out step by step. A key callout: remove the \u003cem\u003eold\u003c\/em\u003e blue sealing gasket from the rough body before installing the new cartridge to avoid damage, then tighten the screws in the numbered sequence. \u003c\/p\u003e \u003ch4\u003eBuilt for Two-Function Showers\u003c\/h4\u003e \u003cp\u003e ThermoBalance II valves supply two separate outlets and are rated up to ~8 GPM at ~44�45 psi, giving plenty of capacity for a showerhead plus handshower. Per Hansgrohe, do not use this valve with a diverter tub spout. The TB-2 restores the valve�s original thermostatic performance. \u003c\/p\u003e \u003ch4\u003eConfidence in Code \u0026amp; Compliance\u003c\/h4\u003e \u003cp\u003e While the cartridge itself is a service part, the complete ThermoBalance II valve assembly carries third-party compliance�ASME A112.18.1\/CSA B125.1, IAPMO listing, and UL listed�when installed per instructions. Using genuine TB-2 parts helps keep that compliance path intact. \u003c\/p\u003e \u003ch4\u003eBacked by Hansgrohe Warranty\u003c\/h4\u003e \u003cp\u003e Hansgrohe backs its consumer installations with a Limited Lifetime warranty (1-year for commercial), available on purchases from authorized sellers. The service page also provides tech tips and support if you need a hand during replacement. \u003c\/p\u003e\n\n- Replaces 30681610, 96740000","brand":"HANSGROHE","offers":[{"title":"1","offer_id":44428056297523,"sku":"HAN88586000","price":129.99,"currency_code":"USD","in_stock":true},{"title":"2","offer_id":44428056330291,"sku":"HAN88586000x2","price":249.99,"currency_code":"USD","in_stock":true},{"title":"5","offer_id":44428056363059,"sku":"HAN88586000x5","price":599.99,"currency_code":"USD","in_stock":true},{"title":"10","offer_id":44428056395827,"sku":"HAN88586000x10","price":1199.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0662\/5964\/8563\/files\/61f86hEcRRL._AC_SL1472.jpg?v=1781205865","url":"https:\/\/plumbing-deals.com\/products\/hansgrohe-88586000-tb-2-thermostatic-cartridge","provider":"Plumbing Deals","version":"1.0","type":"link"}