Description
Product Overview:
These gas controls combine a Lite-Rite manual gas cock, safety shutoff Pilotstat assembly, millivoltage automatic valve operator, and optional gas pressure regulator. They require the use of a 750 mv Powerpile generator (thermopile). The generator, heated by the pilot burner flame, provides the electrical energy to operate the combination gas control. A millivoltage thermostat with suitable accessory controls completes the automatic control system for the heating appliance.
Product Features:
- Includes pilot flow adjustment screw
- Easy to install, adjust and service; all adjustments and connections are accessible from top of control
- Add separate energy cutoff (ECO) where codes call for dual safety shutoff
- Complete safety shutoff on pilot flame failure
- LITE-RITE (OFF-PILOT-ON) lighting sequence
- ECO connector for V800 models, Part No. 392451-1
Product Specifications:
- Description: 1/2 in. NPT x 3/4 in. NPT PowerPile Millivolt Combination Gas Valve with 3.5 in. wc adjustable pressure regulator setting
- Application: Self-powered automatic control - Use with 750 mV pilot generator
- Type of Gas: Natural
- Pressure Regulator: Standard
- Electrical Ratings: 750 mV
- Mounting: 0 to 90 degrees in any direction from the upright position of the gas control knob, including vertically
- Body Pattern: Straight-through - multi-tapped with 1/2 in. right and left outlets plugged, except as noted
- Pressure Tapping: 1/8 in. npt with plug
- Pilot Gas Outlet: Compression fitting for 1/4 in. OD tubing
- Inlet/Outlet Size (in.): 1/2 in. NPT x 3/4 in. NPT with 1/2 in. NPT side outlets
- Pressure Regulator Setting (psi): 3.5 in. wc Reg. Set/3-5" Adj. Range
- Pressure Regulator Setting (kPa): 0.87 kPa
- Pressure Ratings (psi): 1/2 psi
- Pressure Ratings (kPa): 3.5 kPa
- Electrical Connections: Terminal block has 3 combination screw and 1/4 in. quick connect terminals
- Temperature Range (F): 32 F to 175 F
- Temperature Range (C): 0 C to 79 C
- Dimensions (in.): 4 3/4 in. high x 4 1/16 in. wide x 3 3/16 in. deep
- Dimensions (mm): 121 mm high x 103 mm wide x 81 mm deep
- Approvals, Underwriters Laboratories Inc: UL Component Recognized
- Approvals, American Gas Association: AGA Design Certified: File no. L2025003
- Approvals, Canadian Gas Association: CGA Design Certified: File no. L2025003
- Includes: One 3/4" x 1/2" reducer bushing, one 1/2" x 3/8" reducer bushing
Reviews
